Author Archives: admin
Macro Photography
Here’s something I’ve wanted to do for a while, take a close up picture of a plane blade before and after sharpening. It’s not perfect but the second picture with the microbevel is sharper than it was before.
Small turned textured box
Here is a small turned walnut textured box I made from a Lee Valley course taught by Steven Kennard from Nova Scotia.
Cut bolts quick and safe
I needed to trim many bolts to an odd length. This is how I did it using a scrap of wood, drill and a jig saw.
A Sawyer’s Saw Bench
Here is a video I made when I build my saw bench. It’s a design my Tom Fidgen or The Unplugged Workshop.
Shortening tablesaw rails
I bought shorter 32” rails for my tablesaw to replace my current 52” ones for my new smaller shop space. The generic brand didn’t fit my old fence which wanted the square tubing ¼” wider that was on my original … Continue reading
Review Unboxing – Dewalt Tough System Workshop Racking System DWST08270
This is a short unboxing and review of the DEWALT DWST08260 / DWST08270 Tough System Workshop Racking System.
Stanley #113 compass plane
This is the best looking Stanley #113 compass plane I’ve seen. This particular one is a type #2 from 1880-1891 and it moves like butter. Nothing stiff or corroded like it was out of the box.
Cutlery Insert
This took me longer than I thought but I made this drawer organizer out of walnut to set inside the kitchen drawer.
Shop made Festool Kapex crown stops
I made my version of the crown stops available as an accessory for my mitre saw. They were way too expensive so I made my own. I didn’t make them for holding crown moulding, I made them because I wanted … Continue reading
Kapex mitre saw small parts clamp platform
I made an improvement to my mitre saw. The clamp that comes with the saw is too far away from the blade and I sometimes have to cut small parts that won’t reach the clamp. There’s no way I’m holding … Continue reading